Super Strong Neodymium Pot Magnet w/ Eyebolt Ø80 mm

/Super Strong Neodymium Pot Magnet w/ Eyebolt Ø80 mm
  • Super Strong Neodymium Pot Magnet
Primary Competitive Advantages:
  • We are A Professional Permanent Magnets & Magnetic Assemblies Company Operating Since 2004
  • All Magnetic Grade for Sintered & Bonded Magnets
  • Our Quality Guaranteed
  • We Ship Worldwide
  • Small Orders Accepted
  • OEM Design Approvals
  • All Payment Accepted
  • Super Strong Neodymium Pot Magnet w/ Eyebolt Ø80 mm, Rare Earth Hanging Mounting Holding Clamping System, Super Strong Neodymium Eyelet Magnets, Powerful NdFeB Pot Permanent Magnet for Fishing, M10 Thread Eyebolt Pot Magnet, Treasure Salvage Magnets, Search Magnets, Recovery Magnets China Supplier

    Super Strong Neodymium Pot Magnet w/ Eyebolt Ø80 mm Technical
    Material: Neodymium (NdFeB ) and Steel
    Part No.: MPPT-NF80
    Plating / Coating: Nickel (Ni-Cu-Ni) or Zinc (Zn)
    Shape: Eyelet / Eyebolt
    Pot Magnet Size:
    Pot Total Diameter (D): 80 mm
    Pot Magnet Diameter (D1): 17 mm
    Pot Height (h): 19 mm
    Total Height without Eyelet (H): 36.2 mm
    Total Height with Eyelet (H1): 85.2 mm
    Thread M: M10
    Consolidation: Srewing
    Tolerance: ±0.1 mm
    Weight: 744 g
    Holding Force: 200 kg
    Maximum Operation Temperature: 80 °C
    Delivery Time: 7-15 days
    Made in China

    Material: Housing steel and Magnetic core sintered neodymium internal female threaded magnet with eyebolt.
    Version: Housing, galvanized. Magnet, Ni coated or Zn coated
    Note: Shallow pot magnets with internal threaded and eyelet. These magnets are pressed or glued into the receiving holes.
    Hairline cracks in the magnetic material are unavoidable for technical reasons in the D=80 version. They do not impair the attracting function of the magnets in any way.
    Temperature range: max. 80°C.

    Super Strong Neodymium Pot Magnet Cap NdFeB Magnet – Magnetic Pot
    Pot Magnets offer an increase in clamping force onto ferromagnetic materials because the magnets are inside a ferromagnetic casing (Ni or Zinc plated mild steel) which gives an improved magnetic circuit. This allows high clamping forces to be achieved with minimal size.
    The Pot Magnet with External Threaded Stud / Boss Mounting can be screwed into M4, M5, M6 and M8 holes. Or the Pot Magnet with External Threaded Stud / Boss Mounting can be put into a standard hole and a nut can be used to clamp it in place.
    Features:
    – Magnet is encapsulated on all but one side with a protective steel holding pot.
    – Incorporates a countersunk hole for use with flathead screws.
    – Powerful Rare Earth (Neodymium) permanent magnet.
    – High gloss Nickel coating, for protection against corrosion.
    – Maximum operating temperature 80°C / 100°C
    It is possible to produce bespoke Pot Magnets with External Threaded Stud / Boss Mounting but a minimum order quantity may be required (the minimum quantity depends on the size, shape and performance required). We can send our extended range brochure upon request. cap ndfeb magnet

    error: Content is protected !!