Standard Air Cylinder Magnet Injection Mould Ferrite Ring

/Standard Air Cylinder Magnet Injection Mould Ferrite Ring
  • Standard Air Cylinder Magnet Injection Mould Ferrite Ring
Primary Competitive Advantages:
  • We are A Professional Permanent Magnets & Magnetic Assemblies Company Operating Since 2004
  • All Magnetic Grade for Sintered & Bonded Magnets
  • Our Quality Guaranteed
  • We Ship Worldwide
  • Small Orders Accepted
  • OEM Design Approvals
  • All Payment Accepted
  • Standard Air Cylinder Magnet Injection Mould Ferrite Ring, Pneumatic Cylinder Magnetic Rings, Injected Molding Ferrite Magnets, Injection Bonded Hybrid Magnets, Pneumatic Cylinder Sensor Ring Hybrid Ferrite Molded Magnets, MAGNET FOR PNEUMATIC CYLINDER POSITIONING SENSOR, Dimensional Precision Bonded Ferrite Ceramic Magnets China Supplier

    Standard Air Cylinder Magnet Injection Mould Ferrite Ring Specifications:
    Dimension: IR 159*131.2*6mm
    Material: injection bonded Ferrite magnets (plastic magnets)
    Magnet Shape: Ring
    Magnet Size: OD 159mm, ID 131.2mm, T 6mm
    Magnetization: axial
    Magnetic surface filed >650Gs
    Application : Magnet for Pneumatic cylinder

    This specification defines the dimensional and magnetic properties of a multipole magnetic ring for Pneumatic cylinder sesnor applications.

    It is essential to monitor the motion processes in pneumatic cylinders. The permanent magnet mounted on the piston inside the Pneumatic cylinder . The Magnetic cylinder sensors contactlessly detect the piston position of the cylinders and give a switching signal .

    Available typical magnet rings for Pneumatic Cylinder application:

    Cylinder (mm) Magnet Ring/two half Ring Magnetic Strength
    Φ20 D19.5*12*4mm ≥650Gauss
    Φ25 D24.5*16*4mm ≥650Gauss
    Φ32 D31.5*21*4mm ≥650Gauss
    Φ40 D39.5*24*4mm ≥650Gauss
    Φ50 D49.5*32*4mm ≥650Gauss
    Φ50 D49.5*35*5mm ≥650Gauss
    Φ63 D62.5*42*4mm ≥650Gauss
    Φ63 D62.5*48*5mm ≥650Gauss
    Φ80 D79.5*58*4mm ≥650Gauss
    Φ100 D99.5*78*5mm ≥650Gauss
    D125 D124.4*96*6mm ≥650Gauss
    D160 D159*131.2*6mm ≥650Gauss
    D200 D199*185*5mm ≥650Gauss

    Ring Injection Bonded Ferrite Magnets are a combination of good magnetic strength and strong physical properties. The magnets can be easily manufactured on a large scale with close dimensional tolerances and need no finishing operations, thus saving costs. Ashvini Magnets offers a range of injection bonded ferrite magnets that are recognised for high durability and utility. The magnets can be manufactured as per design or custom designed to suit the applications.

    Bonded Ferrite is injection molded using Nylon 6, Nylon 12 and PPS which can be easily aligned in the mold to achieve higher magnetic properties and custom waveforms.

    Characteristics

    Huge variety of shaping possibilities for intricate and complex shapes
    Very good edge strength and greater resistance to Impacts.
    Dimensional precision with very high consistency without any additional processing.
    Consistent magnetic characteristics built to suit custom assemblies.
    Non-corrosive due to their anti-oxidation characteristics
    Simple to complex multi-pole magnetization possible.
    Isotropic/Anisotropic Magnets can be manufactured with very high efficiency and reliability
    Reduction in weight of the magnet as compared to sintered magnets.  Injection Ferrite Pneumatic Cylinder Magnet Ring
    Monobloc molding (Insert molding/Over molding) possible thereby reducing extra assembly operations.
    Highly competitive for multi-pole motor and sensor magnets. 0.03mm~2mm Thin Magnetic Adhesive Sheet Roll
    High Degree of machinability. Isotropic / Anisotropic Hybrid Bonded Magnets Pneumatic Cylinder Sensor Magnet Injection Plastic Ferrite Material

    error: Content is protected !!