Custom Neodymium Magnetic Ball Holder Device with External Thread, Magnetic Socket Joint Holding Optical Systems Magnetic Connector, KD310 Rare Earth Ball Joint Magnets Used for fixing optical equipment, lighting fixtures, monitoring cameras, retaining medical equipment, and in robotic joints, Nickel / Brass Plated Permanent NdFeB Magnetic Ball Joint Assemblies, Magnetic Pole Position, Magnetic Universal Joint […]
Rubberised Bottom Deep Pot Magnets with Threaded Pin NdFeB, Deep pot magnet with external thread, shielded system, Rubberized Deep Blind Ended Pot Neodymium Magnet with rubberised magnetic face, Magnete Stabgreifer
Rubberised Bottom Deep Pot Magnets with Threaded Pin NdFeB Item No. MP-RDPB-Nd series
Housing stainless steel.
Magnetic core NdFeB (neodymium).
Magnetic face rubberised (TPE).
Note: Deep pot magnet with external thread, shielded system. With rubber magnetic face to protect sensitive surfaces. The rubber face increases the coefficient of friction resulting in high lateral frictional forces.
Temperature range: max. 80°C.
Assembly: The deep pot magnets with rubberised magnetic face can be used as a magnetic stop system.
Drawing reference: 1) magnetic face
Using our extensive facilities we also provide customised magnetic assemblies design and build solutions, working to precise client specifications. Alternatively we have a range of over 20,000 off-the-shelf standard magnetic products available in stock. We can also provide extensive advice regarding the best magnetic assembly for your application.
When installing the deep pot magnets make sure that it is directly surrounded by iron. In this case, the adhesive force is reduced by up to 15 percent. It does not matter whether the casing is galvanized or brass. A minimum distance of several millimeters between the housing and the surrounding iron solves this problem. The specific recommended distance varies, but is usually specified by the manufacturers. The adhesive force can also decrease if the magnets are used on uneven, painted or thin surfaces.
Custom Pot Magnets – We produce custom magnets with quick and accurate lead time. Custom sizes and grades are available in Bonded or Sintered Neodymium, AlNiCo, Ferrite (Ceramic), Rubberized, and many more materials. We provide design & engineering assistance, and rapid plastic prototypes. NdFeB Bi-pole Cylindrical Pot Magnets w/ Tolerance h6 and Internal Thread If your application consists of a magnet embedded into a plastic or metal part, we can usually produce the entire assembly. If you need large production runs of magnets or assemblies, we can help.
|Item No.||D||D1||H||L||SW||Magnetic force N|