15 x 10 x 5mm NdFeB Rectangular Magnet N40M Ni, Rare Earth Super Strong Sintered NdFeB Block Magnet for Motor Sensor Rotor Toy, Nickel Coating Licensed Neodymium Permanent Magnets China Supplier 15 x 10 x 5mm NdFeB Rectangular Magnet N40M Ni Technical Specifications: Item: NBN40M-15-10-5 Grade: N40M Material: Neodymium (NdFeB) Plating: Nickel Shape: Block, Rectangular, Rectangle, […]
Round Base NdFeB Magnet Ø22 X 6.9mm, Neodymium Flat Steelpot, Glue-in Pot Magnet, Sintered Neodymium Round Base Magnet, Mounting Permanent Magnet, Rare Earth Flat Pot Magnet, flat Grapples, Magnetic Lens, cap magnet, flat cup magnet, flat gripper, flat pot magnet, neodymium flat pot China supplier factory
Round Base NdFeB Magnet Ø22 X 6.9mm Technical
Material: Neodymium (NdFeB ) and Steel
Part No.: MPPT-NO22
Plating / Coating: Nickel (Ni-Cu-Ni) or Zinc (Zn)
Shape: Flat / without bore
Pot Magnet Size:
Pot Total Diameter (D): 22 mm
Pot Total Height (H): 6.9 mm
Tolerance: ±0.1 mm
Weight: 20 g
Holding Force: 18 kg
Maximum Operation Temperature: 80 °C
Delivery Time: 7-15 days
neodymium flat steelpot Features:
1.Strong magnetic force
2.Ni or Zn coated surface to avoid corrosion
3.Can be used in water environment
Material: Housing steel and Magnetic core sintered neodymium disc magnet.
Version: Housing, galvanized. Magnet, Ni coated or Zn coated
Note: Shallow flat pot magnets without threaded bush. These magnets are pressed or glued into the receiving holes.
Hairline cracks in the magnetic material are unavoidable for technical reasons in the D=25 version. They do not impair the attracting function of the magnets in any way.
Temperature range: max. 80°C.
MPCO Magnetic lenses are characterized by a specific magnetic circuit arrangement, providing thus maximum magnetic force utilization. Their application range includes metalworking plants and/or mechanical engineering plants, in combination with various preparations, tools and devices.
rare-earth, extra strong magnets NdFeB in Steelpot – About Holding Pots: Pot magnets (also known as capped or holding magnets) are encased in a steel protective cap, and may feature a hole, thread or other feature in the centre of the magnet. These features are designed to accomodate mechanical affixing into a design, such as with a screw or bolt.
Holding Pots are magnets encapsulated within a protective steel casing on all but one side.
The dimensions for capped & holding pots are measured “Diameter x Height”, plus any applicable feature.
The protective steel casing on a holding pot will force both magnetic poles out the exposed face.
Application: Pot magnets can be inserted into different instruments, machines, tools. Can be used as auxilliary instruments during transport, clamping, mounting, lifting, welding, separation, etc. The best holding force is reached at full contact of magnetic face with ground ferromagnetic surface, force is vertical to the base (air gap = 0 mm). Small cracks on the magnet or steel pot do not have any influence to the functionality, lifetime and holding force of the pot magnet.