Round Base Neodymium Magnet for Fishing, 1,000 LBS Pulling Force, 4.72″ Diameter round base NdFeB Magnet with Countersunk Hole and Eyebolt, rare-earth neodymium (NdFeB) potmagnet, Extremely strong Permanent Magnet with Nickel-Copper-Nickel coated steel cup Round Base Neodymium Magnet for Fishing Specifications: Item No.: MPCOSFM-02 Dimensions: 4.72” x .70” Hole Diameter: .63” (16mm) Material: NdFeB Magnets […]
Precast Concrete Magnetic System, U-profiles Shuttering System for formwork, U60 formwork-profile steel with integrated magnet, magnetic precast shuttering profile, Magnetic mounting systems China supplier
This magnetic formwork-system, Precast Concrete Magnetic System is consist of a formwork-profile (steel) with integrated magnetic tension-mechanism, which can be used in different formworks. It is specially suitable for the production of filigran- respectively double walls and lattice girder ceilings.
By mean of the tension-mechanism, the profile (layer is planed) is pulled to the bottom of the shuttering, so that an exactly edge of the manufactured item is managed. For the system is one unit, measuring mistakes are not possible. The easy and quick handling increases the work safety. Using the corresponding lever, the system can be taken off and removed easily from the bottom of the shuttering.
By mean of the separated arrangement of tension mechanism and handle-knob, and tension mechanism and shuttering, the forces acting on the formwork and on the magnet during the concrete process are absorbed.
The built-in tension elements are placed in a save position, so that the formwork-system is less sensitive against soiling.
To make possible a stacking up, and to prevent that the formwork stick to each other, the knob is made out of antimagnetic material. The system can also be delivered storeroom- and robot capable.
With defect the old shuttering, by remove from 3 screws, can be easily exchanged.
Declining shapes and dimensions on demand.
Using the Precast Concrete Magnetic System – Formwork Magnet is very convenient, construction workers could build a concrete formwork on a ground , and fit two hex bolt with the adapter onto the the concrete formwork. There is another means of using the concrete formwork magnet, workers could hold the concrete formwork on a hydraulic platform, build and stock the concrete walls, and using forklift and crane to carry the walls while using them. U-profiles shuttering system
This is our new design magnet formwork. our current size have 2m, 3.62m. U 60mm, High 70mm, Length is 500mm – 3500mm. shuttering system with no chamfer, 1 chamfer, 2 chamfers.
shuttering system for ceilings, walls and special parts
high holding power due to powerful and proved MPCO magnets
activation of magnets by simple pressing by hand or foot
direct force closure between shuttering, magnet and table due to force-closed connection of magnet and U-profile
easy removal over the mirror-smooth surface through “sinkable” magnets
available in all standard shapes, lengths and shuttering heights
|Items No.||L(mm)||B(mm)||H(mm)||Magnet||Chamfer 10×45°|
|MFSUP-500||500||60||70||1||NO, one or two side|
|MFSUP-1000||1000||60||70||2||NO, one or two side|
|MFSUP-1500||1500||60||70||2||NO, one or two side|
|MFSUP-2000||2000||60||70||2||NO, one or two side|
|MFSUP-2500||2500||60||70||2||NO, one or two side|
|MFSUP-3000||3000||60||70||2||NO, one or two side|
|MFSUP-3500||3500||60||70||2||NO, one or two side|
Notes：Standard height: 60, 65, 70, 75 or 80 mm, Standard width: 60 mm, Steel plate: 3 mm