Custom Neodymium Magnetic Ball Holder Device with External Thread, Magnetic Socket Joint Holding Optical Systems Magnetic Connector, KD310 Rare Earth Ball Joint Magnets Used for fixing optical equipment, lighting fixtures, monitoring cameras, retaining medical equipment, and in robotic joints, Nickel / Brass Plated Permanent NdFeB Magnetic Ball Joint Assemblies, Magnetic Pole Position, Magnetic Universal Joint […]
Injection Ferrite Pneumatic Cylinder Magnet Ring, Ring Injected Molding Ferrite Magnets, Injection Bonded Hybrid Magnets, Pneumatic Cylinder Sensor Ring Hybrid Ferrite Molded Magnets, MAGNET FOR PNEUMATIC CYLINDER POSITIONING SENSOR, Dimensional Precision Bonded Ferrite Ceramic Magnets China Supplier
Pneumatic Cylinder Sensor Magnet Injection Plastic Ferrite Material Specifications:
Dimension: IR 124.4*96*6mm
Material: injection bonded Ferrite magnets (plastic magnets)
Magnet Shape: Ring
Magnet Size: OD 124.4mm, ID 96mm, T 6mm
Magnetic surface filed >650Gs
Application : Magnet for Pneumatic cylinder
This specification defines the dimensional and magnetic properties of a multipole magnetic ring for Pneumatic cylinder sesnor applications.
It is essential to monitor the motion processes in pneumatic cylinders. The permanent magnet mounted on the piston inside the Pneumatic cylinder . The Magnetic cylinder sensors contactlessly detect the piston position of the cylinders and give a switching signal .
Available typical magnet rings for Pneumatic Cylinder application:
|Cylinder （mm)||Magnet Ring/two half Ring||Magnetic Strength|
Ring Injection Bonded Ferrite Magnets are a combination of good magnetic strength and strong physical properties. The magnets can be easily manufactured on a large scale with close dimensional tolerances and need no finishing operations, thus saving costs. Ashvini Magnets offers a range of injection bonded ferrite magnets that are recognised for high durability and utility. The magnets can be manufactured as per design or custom designed to suit the applications.
Bonded Ferrite is injection molded using Nylon 6, Nylon 12 and PPS which can be easily aligned in the mold to achieve higher magnetic properties and custom waveforms.
Huge variety of shaping possibilities for intricate and complex shapes
Very good edge strength and greater resistance to Impacts.
Dimensional precision with very high consistency without any additional processing.
Consistent magnetic characteristics built to suit custom assemblies.
Non-corrosive due to their anti-oxidation characteristics
Simple to complex multi-pole magnetization possible.
Isotropic/Anisotropic Magnets can be manufactured with very high efficiency and reliability
Reduction in weight of the magnet as compared to sintered magnets. Injection Ferrite Pneumatic Cylinder Magnet Ring
Monobloc molding (Insert molding/Over molding) possible thereby reducing extra assembly operations.
Highly competitive for multi-pole motor and sensor magnets. 0.03mm~2mm Thin Magnetic Adhesive Sheet Roll
High Degree of machinability. Isotropic / Anisotropic Hybrid Bonded Magnets