Neodymium Channel Doors, Cabinets or Gun Mount Magnets w/ Screws, Block Magnet Embedded In Steel Channel, U-Channel NdFeB Magnet with Countersink Mounting Holes, Bar Magnet in Channel, Magnetic Door Latch, holding magnets channels assemblies, Magnetic Device, powerful U-shaped magnetic assemblies China Supplier Neodymium Channel Doors, Cabinets or Gun Mount Magnets w/ Screws Specifications: Item No.: […]
Plastic Housing Rectangular Office NdFeB Magnets, Colourful Office Notice Board Magnets, Planner Organisation Magnets, Polypropylene Coated Office Whiteboard Glassboard Permanent Magnets, Bulletin Board Neodymium Magnet in ABS Plastic Housing, Rare Earth Education / Fridge Magnets China Supplier
Plastic Housing Rectangular Office NdFeB Magnets Features:
Item No.: MP-BONM01
Material: Neodymium, Iron, Boron (NdFeB) + Plastic (Polypropylene)
Magnet Grade: N38, N40, N42, N45
Magnet Shape: Block, Rectangular
Color: White, Blue, Red, Orange, Black (or customer’s required)
Total lenght (L): 55 mm
Total width (B): 22.5 mm
Total height (H): 8.5 mm
Max Operating Temp: 80ºC
Weight: 0,0092 kg
Tolerances: ±0.01 x ±0.01 mm
Magnetization Direction: Magnetized Axial Through Thickness (Poles on Flat Ends)
Magnet size is prior to plastic coating
These is our popular neodymium block magnet with a protective plastic coating. The plastic coating is very much durable layer of plastic, which protects the magnet from impact damage and corrosion. The plastic coating is very water resistant, but not recommended for underwater use, as the rubber seal is not guaranteed waterproof. The plastic also helps to limit slipping on smooth surfaces.
Plastic Housing Rectangular Office NdFeB Magnets Round magnets with flat top – equipped with neodymium-iron-boron magnets
These magnets are widely used in planner and organisational systems. The high adhesion and a printing with company logo or icons expand the promotional items. neodymium glassboard magnets
extremely strong organization magnet with white plastic.
the elongated memomagnet were two neodymium scheibenmagnete wechselpolig installed, allowing a higher power is achieved. to remove directly from a metallic surface, you need a certain strength. please don’t underestimate it.
on a painted metalltüre holds the magnet 22 a4 sheets.
The plastic coating is about 1mm thick itself, according to the final size, the magnet size should change to be 2mm less. But it will make the magnet less stronger, if you choose plastic coating, you may have to choose a stronger magnet than your original design. In addition, the plastic coating will need a tooling charge, but different colors can be produced by a same mold.
We welcome your own design to make a custom plastic magnet for your application.