NdFeB Deep Pot Round Magnets with h6 Tolerance & Machinable Magnetic Face

/NdFeB Deep Pot Round Magnets with h6 Tolerance & Machinable Magnetic Face
  • NdFeB Deep Pot Round Magnets with h6 Tolerance & Machinable Magnetic Face
Primary Competitive Advantages:
  • We are A Professional Permanent Magnets & Magnetic Assemblies Company Operating Since 2004
  • All Magnetic Grade for Sintered & Bonded Magnets
  • Our Quality Guaranteed
  • We Ship Worldwide
  • Small Orders Accepted
  • OEM Design Approvals
  • All Payment Accepted
  • NdFeB Deep Pot Round Magnets with h6 Tolerance & Machinable Magnetic Face, Magnetic core neodymium pot magnets, magnet system, Holding Cup Magnets with Fitting Tolerance, Magnetic Holding Assemblies & Cylindrical Bar Rod Pot Magnet China Supplier

    NdFeB Deep Pot Round Magnets with h6 Tolerance & Machinable Magnetic Face Item No. MP-DPB-Nd series
    Material:
    Housing brass.
    Magnetic core NdFeB (neodymium).
    Note: Smooth design, shielded system. Under no circumstances may Neodym magnets be pressed directly into iron, loss of attractive force due to magnetic short circuits occurs. Diameter “D” ground to an h6 tolerance.
    These magnets can be shortened by the dimensions “H1” and “H2”.
    Temperature range:max. 150°C.
    Assembly:The magnets can be mounted by press-fit, screwing-in or gluing.

    A deep pot magnet offers high holding forces on parts that are thick and clean with a good surface finish. To make a jig or fixture magnetic, simply drill a flat bottomed hole and a central fixing hole, push the deep pot magnet into it and secure tightly from underneath with a cap screw. The magnets magnetic face can now be ground flush with the surface of the fixture. Deep Pot Magnets are Magnetic Holding Assemblies for use where a very strong surface holding magnet is required. The magnet sits inside a steel case which provides extra strong magnetism on one face only, provides a hole for fixing and also protects the magnet from damage. One of the largest usages of magnets is the application of holding or gripping, the basic principle of the holding or pot magnet is to direct and concentrate the flux from both magnetic poles to one active face. This is usually achieved with steel pole pieces or a steel (brass)-backing cup. The standard selection can be broken down into three material types and there is a great variety of systems available. The Material have Neodymium-iron-boron (NdFeB), Alnico and Samarium-Cobalt (SmCo). The body of Types brass body and steel body. The styles of Types are cylindrical without fitting tolerance h6, pot with fitting tolerance h6, pot with fitting tolerance h6 and internal thread, with internal thread and cylindrical pot with threaded neck.

    Potential possibilities with Pot Magnets. Permanent pot magnets Deep Pot Magnets Brass Body with Fitting Tolerance h6, SmCo Cylindrical Pot Magnet w/ Fitting Tolerance h6 and Internal Thread
    Permanent pot magnets. Powerful magnets with a focused magnetic field. Pot magnets are often used as tools for various activities in workshops and in industry. Pot magnets daily render invaluable manual and clamping services in fixing metallic pieces of work forn processes such as cutting, milling and drilling. An important property of pot magnets is the fact that the magnetic field is restricted to the pole surface – the other sides demonstrate no magnetic effects. This does protect the immediate environment from unwanted magnetic influences.

    Deep pot round magnets with machinable magnetic face NdFeB drawing

    Deep pot round magnets with machinable magnetic face NdFeB drawing

     

    Item No. D H H1 H2 Magnetic
    force N
    Magnetic force
    at H2 max.
    N
    Gap to
    iron wall
    mm
    MP-DPB-Nd6 6 20 10 3 9 12 1,5
    MP-DPB-Nd8 8 20 10 3 22 29 1,5
    MP-DPB-Nd10 10 20 8 5 27 38 2
    MP-DPB-Nd13 13 20 6 5 49 66 2,5
    MP-DPB-Nd16 16 20 2 6 94 108 3
    MP-DPB-Nd20 20 25 5 7 173 235 4
    MP-DPB-Nd25 25 35 7 8 292 380 5
    MP-DPB-Nd32 32 40 4,5 10 529 640 6