Unipole On OD and ID Sintered NdFeB Ring Magnet, N33EH UNIPOLE RADIALLY MAGNETIZED TUBE Magnets, Sintered NdFeB Magnetic Radially Aligned Rings for Motor Rotor, Skewed Uni-Pole Radial Aligned Tube Ring Magnet Supplier Unipole On OD and ID Sintered NdFeB Ring Magnet Feature: Material: Neodymium Iron Boron, Neo , Nd , Rare earth NdFeB Size: as […]
9 lb. Mini 4-Pieces Magnetic Welding Positioner, 9lb Small Welding Magnet Right Angle Square Holder Soldering Durable, Mini Magnetic Welding Holder Set, welding adjustable magnetic tab holder, magnetic clamps corner magnets for welding, magnetic ground clamp for welding
9 lb. Mini 4-Pieces Magnetic Welding Positioner Technical Specs
Item No. MP-MWH6010
Angle 45 Degrees , 90 Degrees , 135 Degrees
Max. Pull 9 lb.
Color Red / Blue / Orange
Material Ceramic Magnet, Steel
On/Off Setting No
Size 2-7/8 L X 1-3/4 W X 1/2 Inch H
Packing: Double blister
Carton size: 32*21.5*35cm
N.W./G.W. : 19 / 20 kgs
These Little Holders Measures 2-7/8 L X 1-3/4 W X 1/2 Inch H – Set Weighs 15.4 Ounces
Dependable, Powerful Magnets With High Gloss Enamel End Plates; Red In Color
Holds Work At 45, 90 And 135 Degrees
Ideal For Many Welding Jobs Not Requiring A Larger Magnet
Perfect For Jobs With Limited Space – These Little Magnetic Holders Fit In Easily
Strong powerful magnets. Pack of 4 (4 magnets) are supplied.
These magnets are very useful to tack together frames before fully welding.
Can be used as a double sided holder for welding and assembly work.
Designed to work as an extra hand which enables fast and accurate holding of any ferrous materials / objects.
The 90 degree angle makes sure your work is at a right angle.
Will hold both sheet and tubes at angles of 45 / 90 and 135 degrees.
This 9lb version is perfect for lighter and smaller frames.
Also suitable for separating steel sheets.
Double riveted steel construction.
Approx. size 75mm x 45mm x 12mm.
When it comes to welding fabrication, it seems like you never have enough clamps, and certainly not enough hands to hold the steel components in place. If you are dealing with small parts or irregular shaped assemblies, this further complicates the problem. One fast and easy solution is to use magnetic welding holders to secure the parts while you can tack them together. Magnetic welding holders are strong and can maintain a 90-degree angle during the fabrication process. I had a drawer full of them in my toolbox in my race shop. They are available in all shapes and sizes. Magnetic Support Jig