High Precise Magnetic Rotor Assemblies, Rotor and Stator magnetic lamination assemblies, Magnetic Motor Shafting, Electric Motor Shafts, permanent magnet motor shafting China Manufacturer MPCO MAGNETICS can design, produce and supply High Precise Magnetic Rotor Assemblies Magnetic Shaft to customer requirements. 1. Materials Magnet: Neodymium Magnet Sleeve: Austenite stainless steel, such as SS304, SS316. Main part: […]
Large Diameter Ferrite Ring Multi-polar Permanent Magnet, Anisotropic Multipolar Ring Ceramic Magnet, Injection Molding Ferrite Permanent Magnets, hard ferrite magnet ring industrial magnets, customized anisotropic multipolar ring ferrite magnets
Large Diameter Ferrite Ring Multi-polar Permanent Magnet Features:
Material Permanent Ferrite Magnet
Packing Magnets+ Small Carton+ Green Foam + Big Carton
Delivery Time Shipped in 10 days after payment
Used motor,living room, office, car…
Injection Molded Permanent Magnets, Ferrite Anisotropic Multipolar Ring Magnet
Injection molded (bonded) magnets made from Nd, SmCo, Fe:
Injection molded Ferrite, mfg method can be either isotropic or anisotropic, plastic binder options of Nylon, PPS, etc.
Injection molded Neodymimum, isotropic mfg, neodymium-iron-boron with duroplastics and thermoplastics.
Plastic-bonded permanent magnets, mfg method can be either isotropic or anisotropic production, samarium-cobalt with optional plastic binders
Permanent magnetic ferrite is also known as hard ferrite, which is a non-metallic magnetic material. In 1930,Kato and Takei discovered a kind of permanent magnet with spinel (MgA12O4) structure, whcih was the prototype of today’s widely used ferrite.The main raw materials of ferrite product are SrO or BaO and Fe2O3.Ferrite is produced by the ceramic process “pre-burn, crushing, milling, pressing, sintering and grinding”,with the features of wide hysteresis loop, high coercivity, high remanence,and it can maintain a constant magnetism after magnetization and its density is 4.8g/cm3.According to different production processes, it is divided into two kinds,sintered and bonded ferrite magnet,while the sintering ferrite is divided into wet and dry pressing molding,and bonded ferrite includes extrusion molding, compression molding and injection molding.The bonded ferrite powder and synthetic rubber also can be used to make soft, flexible and twistable rubber magnet.Based on whether adding magnetic field when forming,it is divided into isotropic and anisotropic permanent magnet. Anisotropic Injection Ferrite Multi-polar Magnetic Ring
Compared with other permanent magnet materials:
Advantages: cheap, broad raw materials source,high resistance to high temperature (250 degrees maximum) and corrosion.
Disadvantages: low remanence compared with NdFeB products,in addition, because of its relatively low density, loose and friable material structure,many processing methods are subject to its limitations,such as drilling, digging holes. Most of its products only can be made through the molding with poor product tolerance accuracy and high tooling cost.
Coating: because of its excellent corrosion resistance, there is no need to add the coating.