Channel Holders Latch Ceramic Sandwich Magnets, Grade 8 Ceramic Block Magnet Sandwich Assemblies, Flange Channel Sandwich Magnetic Device with Hole, Flange Magnets, Sandwich Assembly Mounting Magnet, Hard Ferrite Powerful Holding Rectangular Block Magnet China Supplier Channel Holders Latch Ceramic Sandwich Magnets Specifications: Item No.: MPSMA series Magnet Material: Ceramic Material: Block Ceramic Magnet + Two […]
Ferrite Permanent Sintered Multipole Ring Magnet for DC Motor, Multipole Polar Sintering Ceramic Magnet Rings, Customized radial multipole ferrite magnetic ring, Hard Ferrite Anisotropic Stepping Motor Rotor Permanent Magnets China Supplier
Ferrite Permanent Sintered Multipole Ring Magnet for DC Motor Description
1.Material: ferrite powder, etc
2.Grade: Y25, Y30, Y30BH, Y35
3.Size: D20 * T9 , D40 * T13 , D30 * T9 , D50*10 , D54 * T8mm , etc.
4.Shape: Arc, Block, Bar, Ring, Cube, Disc, or others.
5.Application: Widely used in ammeter, speaker, audio, phone, TV, dynamo, DC permanent magnet motors (used in cars), etc
* Low cost, high-energy, good electric insulation and excellent resistance to demagnetization.
* High coercive force, high electric resistance, long-time stability, and economical price.
Isotropic ferrite magnets
Anisotropic ferrite magnets
1. Dry process:
By dry process, can produce isotropic & anisotropic magnets. The tool can be changed and developed easily.
2. Wet process:
By wet process, only anisotropic magnets can be produced. It is complicated to change the tool and the tooling charge is much higher.
1. Isotropic ferrite magnets are not oriented and can be magnetized in any direction;
2. Anisotropic ferrite magnets are different, they are all oriented in the manufacturing direction, and should be magnetized in the direction of orientation.
Hard Ferrite magnets are sintered permanent magnets composed of Barium or Strontium Ferrite. This class of magnets has good resistance to demagnetisation and corrosion, Due to their low cost, Ferrite magnets enjoy a very wide range of applications, from motors and loudspeakers to toys and crafts, occupy about 75% of the world market of constant magnets. we can supply you with both wet-pressed anisotropic and dry-pressed isotropic grades in all shapes and sizes. Multipolar Ring Sintered Ferrite Ceramic Permanent Magnet
The products of the company are with precision size, stable performance, excellent quality products; the diameter is in the range of 10mm-80mm, from 2 poles to 48 poles with variety of specifications, we can supply sine wave, trapezoidal wave, square wave and other magnetizing waveform. High performance of the products and the surface magnetic flux density can reach from 1200 GS to 2100GS. Permanent Hard Ferrite Ceramic Multipole Magnet Rings
The products are widely used in Brushless DC motor, precision servo motor, permanent magnet motor, micro motor, instrumentation, magnetic drive, magnetic therapy devices,etc.
Br 3600~3900 HCb 3100~3400 Hcj 3300~3800
Φ12 series surface magnetism ≥1300GS
Φ13~15 series surface magnetism ≥1450GS
Φ16~18series surface magnetism ≥1500GS
Φ19 and above this size series surface magnetism ≥1550GS
All products can be manufactured according to Customers’ requirements,drawings and samples.
In order to quote you the best price of magnet quickly . please provide the following information:
1. Magnet’s size . grade . magnetic direction,quantity
2. Attached the drawing if customized
3. Any special packing or other requirement
If you have any questions,pls don’t hesitate to contact us
Partially sintered ferrite multipole magnetic ring specification and surface flux density list:
Surface magnetic flux density (GS)
|1||OD 25* ID (6.5~7.0) * H25~40||25||6.5~7.0||25~40||2||1400-2100|
|2||OD 19* ID (6~7)*30||18||6~7||30||2||1400-2100|
|3||OD15* ID (5~6)*H (18~30)||15||5~6||18~30||2||1400-2100|