Powerful Rubber Coated Magnet System with Socket, Car Vehicle Magnet Mount Holders, Rubber Encased NdFeB Magnet for Retail Fixing, Holding, Boutique Magnets, Rubber Coated Magnets with Screwed Bush, Female Thread Neodymium Magnetic Ceiling System LED Light Bar Car Roof Top Mounting Magnets, Rubber Embedded Waterproof Car Taxi Sign Magnetic Base Mount Holder China Supplier Powerful […]
Dia22mm Rubber Coated Neodymium Pot Magnets w/ M5 Screw Threaded Center Hole, Rubberized Multiple-pole Neodymium Magnet System, Magnetic Ceiling System LED Light Bar Car Roof Top Mounting Cup Magnets, Rubber Embedded Round POS Magnets, Waterproof Car Taxi Sign Magnetic Base Mount Holder, RUBBER-COATED FEMALE THREAD NECK POT MAGNET China Factory
Dia22mm Rubber Coated Neodymium Pot Magnets w/ M5 Screw Threaded Center Hole Features:
Item No. RCM04-C22
Magnetic Face: 19mm dia
Plating: Ni-Cu-Ni ( Nickel )
Vertical Pull (Kg): 3.8
Slide Resistance (Kg): 1.9
Max Temp (degrees C): 80
Fixing: M5 Screw
Neodymium iron boron ‘rare earth’ material. Strongest magnet material available. 80°C max operating temp.
The rubber coating makes these anti-slip and powerful magnet systems the ideal choice for use on delicate surfaces. The rubber coating is perfect for fixing POS signage displays onto delicate metal surfaces, leaving no marks and providing a good level of corrosion protection for outdoor use. The rubber also allows for extremely effective hold in sheer forces. The pot magnets are available with black or white rubber coating.
The magnet systems – colloquially also called pot magnets – are equipped with heteropolar NdFeB magnets that are fully encased in a layer of rubber (technical term: elastomer). This rubber casing offers a number of benefits. It not only protects delicate surfaces against scratching, but also prevents oxidation of the highly corrodible magnets through moisture. At the same time, the rubber increases the magnet’s displacement forces and prevents slippage. The rubber coated pot magnets are temperature-resistant up to 140 °F. The rubber coating also protects them against moisture and spray water. However, the permanent outdoor use of rubber coated magnets is not recommended.
Rubber coating of pot magnets is considered useful when using sensitive surfaces like glass and plastics, or highly finished vehicular surfaces. Rubber coating is also useful to prevent corrosion in marine, aquatic or external environments, as well as in areas where metal strike presents a risk to the magnet. Metal strike situations are more likely in mechanical environments related to motors and machinery.
Rubber coated pot magnets are often placed to create a fixing or hanging point. The rubber coating provides for superior slide resistance due to greater friction between the rubber and steel surface to which the magnet is bonded. Manufacturers and industrial designers use rubber coated pot magnets for holding and fastening.
Products and devices held together with rubber coated pots allow you to easily uncouple the magnet at pre-determined pressure points for regular cleaning or servicing.
This characteristic increases the durability and ease of use. Used as connective tissue in plastic clad fabrications, rubber coated pot magnets do not typically puncture or penetrate plastic material, helping to maintain the monolithic nature and integrity of these fast evolving resinous forms.
The multiple pole design of these rubber coated Neodymium (NdFeB) pot magnets ensures a dense shallow magnetic field on the holding surface. This allows for excellent holding onto thin, lacquered car body metal. The sideways displacement (sheer forces) are extremely good due to the suction effect of the rubber surface.
*For car electronic salute fixing
*Used for fixing spotlights of car ceiling
*For wedding car flower plates, camera fixed
*For industrial tooling, factory equipment installation and fixing
*For cars, van roof advertising light boxes, radio, speakers, etc.
The rubber protects the magnet from occasional moisture. Permanent outdoor use, however, may lead to the formation of rust. Our neodymium pot magnets with rubber coated, on the other hand, are rust-proof.
The rubber coating also can Increase the friction and improve the stability of pull-force.
Multi-Use:Cameras, LED Working &Signal Lighting, Miniature Equipment , Control Panel, Mounting fixtures.
Our Services & Strength
1. 12 years Neodymium magnets manufacturer in China
2. Complete supply chain & global logistics system
3. Sample and bulk 100% inspection
4. Expert of Magnetic assemblies, over 10 years experience professional engineering team in this field
5. Our sales team will give you feedback within 10 minutes, provide solutions within 6 hours.
MPCO is dedicated to the production and sales of NdFeB magnet material and related assemblies, especially for the assemblies. Such as magnetic push pins,fishing magnets, magentic hooks, pot cup magnets, rubber coated pot magnet and some custom magnetic assemblies. M5 Internal Screw Thread Heteropolar NdFeB Rubber Casing Magnets Dia 31mm