Powerful Rubber Coated Magnet System with Socket, Car Vehicle Magnet Mount Holders, Rubber Encased NdFeB Magnet for Retail Fixing, Holding, Boutique Magnets, Rubber Coated Magnets with Screwed Bush, Female Thread Neodymium Magnetic Ceiling System LED Light Bar Car Roof Top Mounting Magnets, Rubber Embedded Waterproof Car Taxi Sign Magnetic Base Mount Holder China Supplier Powerful […]
Ø43mm NdFeB Rubber Coated Magnet with Female Thread M4, Rubberized Magnet System with Internal Thread, Light Fixing Magnet, Magnetic Ceiling System LED Light Bar Car Roof Top Mounting Pot Magnets, Boss Thread Rubber Embedded Round POS Magnets, Waterproof Car Taxi Sign Magnetic Base Mount China Supplier
Ø43mm NdFeB Rubber Coated Magnet with Female Thread M4 Features:
Item No. RCM04-C44
43mm dia x 6mm high.
Black Rubber Coated POS Magnets.
M4 Boss Thread (Flush x 3mm deep).
Neodymium magnet (NdFeB) coated in resin .
Superior resistance to sliding.
Maximum 60 degree Celsius operating temperature.
The rubber coating is perfect for fixing POS signage displays onto delicate metal surfaces, leaving no marks and providing a good level of corrosion protection for outdoor use. The rubber also allows for extremely effective hold in sheer forces.
Features of pot magnets with rubber coating, Magnetic Cup Assemblies with rubber coat and internal thread
Principle: The strong neodymium magnets are embedded in a steel pot. The steel pot increases the adhesive force of the magnet on direct contact with a thick iron surface. If there is no direct contact with the counterpart, or if the steel plate is thin, painted or rough, you won’t be able to put as much strain on it. Rubberized Magnet System Ø66mm with Internal Thread M6
Rubber coated neodymium pot magnets are strong and durable magnetic assemblies with a threaded center hole (internal female thread) and protective rubber coating. Made with N42 neodymium disc magnets attached to a flat steel disc and coated with black isoprene rubber which leaves no marks and prevents surfaces from scratching. The protective rubber coating protects magnets from corrosion or oxidation for sustained use in outdoor environments. It also prevents magnets from chipping easily and provides more slip-resistance than other types of coated or uncoated magnets.
The magnet systems – colloquially also called pot magnets – are equipped with heteropolar NdFeB magnets that are fully encased in a layer of rubber (technical term: elastomer). This rubber casing offers a number of benefits. It not only protects delicate surfaces against scratching, but also prevents oxidation of the highly corrodible magnets through moisture. At the same time, the rubber increases the magnet’s displacement forces and prevents slippage. The rubber coated pot magnets are temperature-resistant up to 140 °F. The rubber coating also protects them against moisture and spray water. However, the permanent outdoor use of rubber coated magnets is not recommended.
*For car electronic salute fixing
*Used for fixing spotlights of car ceiling
*For wedding car flower plates, camera fixed
*For industrial tooling, factory equipment installation and fixing
*For cars, van roof advertising light boxes, radio, speakers, etc.