Standard Magnetic Security Screwdriver

This magnetic screwdriver is capable of holding any 1/4 inch hex driver inserts. The magnetic tip aids application and there is also a storage compartment in the bottom of the driver to hold your most regularly used bits. The handle of the screwdriver is designed with grip in mind – ridges and grooves mean that you can maintain a tight grip, unlike many rounded screwdrivers which can sometimes be difficult to utilise.
This item is supplied with 6 security driver inserts, sized TH3-TH8

This two hole driver insert is a 1/4 inch hexagonal drive that fits into most conventional magnetic drivers. This insert is suitable for the following security screws only;

Standard Magnetic Security Screwdriver

Standard Magnetic Security Screwdriver

Magnetic Security Screwdriver – 2 Hole security screws (sometimes known as Snake Eye® or pig nose) are designed for low to medium torque applications. They have two holes drilled into the head which need a unique 2-pin driver to install and remove.
Aesthetically pleasing head design, often specified by designers and architects. Available from stock in self-tapping and machine screws.

This pin hex driver insert is a 1/4 inch hexagonal drive that fits into most conventional magnetic drivers.

This uniquely designed extra long driver can be used to install and remove Pin Hex security Screws in difficult to access places. This insert is suitable for the following security screws only;

Gauge M3 Machine Screws

Delivery:Next working day if ordered before 4pm (Mon-Fri)