MAGNETIC QUICK CHANGE SYSTEM FOR MOULDS, magnetic clamping systems for mould change
Electro permanent magnetic quick-change systems are used for fast and safe clamping of moulds in injection molding machines from 50 – 4000 TON, resulting in less machine downtime.
All molds, regardless of their shape or weight, can be clamped without any mould modifications.
The mould is clamped uniformly over the entire contact surface, and does not deform when ejected, so that parts of better quality can be injected.
Set-up times can be reduced by 90% compared to a conventional procedure. One operator carries out the procedure without having to climb into the machine.
The highest standard of eight safety functions forms a real-time protection system.
MAGNETIC PLATE MOVABLE SIDE
MAGNETIC PLATE FIXED SIDE
1.Lower the mould into the injection moulding machine.
2.Position the mold with the locationg ring and close the machine.
3.Execute the MAG cycle for the fixed- and movable side of the mould.
4.Release the mould from the hook and start the automatic production process.
1.Close the mould and attach it to the hook of the crane.
2.Execute the DEMAG cycle for the fixed- and movable side of the mould.
3.Move the movable plate of the machine back and remove the mould.
4.The machine is ready for a new mould
BENEFITS OF AN ELECTRO PERMANENT MAGNETIC QUICK CLAMPING SYSTEM
The magnetic force remains permanently present, even in the event of a power failure.
More than 95% energy savings
More than 90% time savings on mould changes
Full-metal clamping surface, long lifespan
Uniform clamping force, resulting in better quality of injected parts.
No moving parts, no heating, no wear parts