ABOUT MAGNETIC ASSEMBLIES AND SUB-ASSEMBLIES
MPCO Magnet specializes in producing magnetic assemblies and sub-assemblies per your requirement. From the selection of magnetic material to design services, we are happy to assist you throughout the whole process.

Learn more about how we helped Customer update their magnetic assembly, becoming more efficient and reducing overall cost.

Customer use two different types of image stabilization – digital and optical. Optical image stabilization is more sensitive than digital. By combining two assemblies into one, we were able to improve this key component of their product.

MAGNETIC ASSEMBLIES AND SUB-ASSEMBLIES

MAGNETIC ASSEMBLIES AND SUB-ASSEMBLIES

THE PROBLEM
Customer’s original requirement was a shaft centerline with a magnetic orientation of 15 degrees. Orgininally, Customer would first complete the mold for the axle and card. After providing the magnets, they put the pieces together in their factory. This was very inefficient – during the connection process the glue would easily move on the product. The result: the quality control failure rate was very high.

THE SOLUTION
We were able to offer Customer a solution through a precision injection process. First, we placed a magnet in the injection mold with a guaranteed angle of 15 degrees (+/-0.5). Second, shallow grooves were added to increase adhesion of the glue and keep it from moving over time.

THE RESULT
Customer was able to improve quality control pass rates as well as production efficiency. Having solved this problem concerning a key component to the camera Customer was able to move forward.

Find out how MPCO Magnet can assist you in your project. Contact your sales representative today!