How to Improve The Characteristics Of Magnetic Components
At present, the development of modern industry is so rapid, and the use of magnetic components in life and work is becoming more and more extensive. MPCO Magnetic Products Co., Ltd. is also involved in the magnetic components. There are certain researches. Our company produces and sells magnetic materials and magnetic components. There are magnetic pumps, permanent magnet motors, permanent magnets, etc., which are also certain in the industry. Word of mouth. In what ways can the characteristics of magnetic components be improved?
Magnetic component Common causes of transformer and inductor failure on magnetic components: too large operating voltage or current, excessive power loss, too high ambient temperature / poor heat dissipation, resonant frequency of working frequency and body frequency, insulation material and winding material select. new magnetic material technology
The characteristics of the magnetic component can be improved by replacing the standard wire in the winding with a low-loss core, with an excitation wire, a multi-strand wire or a copper plate, especially when the magnetic component is applied at a high frequency. The effect is obvious. In general, when a symmetrical, expected voltage is produced at the output coil end, changes in these measures must be taken to reduce losses and leakage inductance. Plastics and insulating materials with a rated temperature ratio of the magnetic component can also be improved.
Tube Neodymium Micro Magnet, Sintered Neodymium Iron Boron Ring Micro Tiny Magnets Specifications: Materials NdFeB, Grade: N30-N55, N30M- 52M, N30H-52H, N30SH-48SH, 30UH-42UH, 28EH-40EH, N28AH-35AH Shape Ring, Customized shapes for Neodymium Magnets are available. Dimensions Radius: 9.8mm Width: 2.54mm Thickness: 4.68mm Accept Customized Tolerances Radius: -0.04 to +0.04mm Width: -0.1 to +0.06mm Thickness: -0.03 to +0.03mm Accept […]
Neodymium Ring Micro Magnets, Strong Micro Tube Magnets, Sintered Neodymium Iron Boron Micro Magnets Specifications/Special Features: Material NdFeB, N45 Shape Ring / Customized shapes for Neodymium Magnets are available. Dimensions OD: 3mm ID: 2mm Thickness: 2mm Accept Customized Tolerance ±0.02mm Accept Customized Coating None Capacity more than 1000K pieces/month Application medical equipement Introduction Neodymium Magnets are widely […]
Micro NdFeB Ring Magnet with Long Hole Specifications/Special Features: Material NdFeB, N52 Shape Ring / Customized shapes for Neodymium Magnets are available. Dimensions OD: 0.8mm ID: 0.3mm Thickness: 3mm Accept Customized Tolerance ±0.02mm Accept Customized Coating None Capacity more than 1000K pieces/month Application medical equipement Introduction Neodymium Magnets are widely used in many fields, such […]