Magnetic Field

/Magnetic Field
  • Strong TMR Sensor Magnets

TMR Sensor Magnets

TMR Sensor Magnets TMR sensor is an epoch-making magnetoresistance effect sensor which has been applied to industrial application in recent years. TMR sensor has a much higher resistance change rate compared to AMR and GMR sensor, thus obtained many merits include low cost and power consumption, high response frequency and sensitivity. SDM has also collected [...]

  • All About Magnetism and How it Works

All About Magnetism and How it Works

All About Magnetism and How it Works From your clothes to your desk, every bit of matter is made of tiny particles called atoms. Atoms have negatively charged electrons that spin around them. Most of the time, the electrons spin in random directions. When the electrons all spin in the same direction, though, they create [...]

By |October 11th, 2019|Learning Resources, Magnetic Field, Magnetic Knowledge, Magnetic News, Magnetism, MPCO Magnetics News|Comments Off on All About Magnetism and How it Works
  • Reed Switches

Reed Switches vs. Magnetoresistive Sensors

Reed Switches vs. Magnetoresistive Sensors In a previous post we took a look at magnetic field sensors vs inductive proximity sensors for robot grippers. In this post I am going to dive a little deeper into magnetic field sensors and compare two technologies: reed switches, and magnetoresistive sensors (GMR). Reed Switches The simplest magnetic field [...]

  • Magnetic Test Room for Injection Bonded Magnets

MPCO Established Magnetic Test Room for Injection Bonded Magnets

MPCO Established Magnetic Test Room for Injection Bonded Magnets MPCO Established Magnetic Test Room Tooling is critical to the quality of injection bonded magnets of all types. MPCO Magnets has the expertise and complete range of services under one roof to design and manufacture moulds for new and critical as well as well proven injection [...]

  • Magnetic Field Sensors

Magnetic Field Sensors

Magnetic Field Sensors - Contactless and reliable detection Today’s pneumatic cylinders are compact, reliable, and cost-effective prime movers for automated equipment. Unfortunately, they are often provided with unreliable reed or Hall Effect switches that fail well before the service life of the cylinder itself is expended. magnetic field cylinder sensors are based on non-contact, solid-state [...]

  • Concepts for Magnets

MPCO Concepts for Magnets

MPCO Concepts for Magnets, The power of imagination! Clients have immense confidence in concepts offered by MPCO Magnets, even if it means modifying their product designs, at times. Imagining the right concept for engineering the magnets is core to the value and performance of the of the application itself. MPCO Magnets has partnered with Clients, [...]

  • Magnetic-Based Reed Switch Sensors for OEM Consumer Electronics

Magnetic-Based Reed Switch Sensors for OEM Consumer Electronics

Magnetic-Based Reed Switch Sensors for OEM Consumer Electronics In the world of OEM consumer electronics, ongoing commercial demand for the “latest and greatest” in portable devices has led to ongoing requirements for magnetic-based reed switch sensors, switches and actuators, as well as bare reeds, in support of such requirements as: Magnetic-Based Reed Switch Sensors [...]

  • Magnet systems and safety

Magnet Systems and Safety

Magnet Systems and Safety Permanent magnets and electromagnets are both switchable, but there is an important difference: permanent magnets are compact and always function – they retain their magnetic force; electromagnets switch quickly and without wear, and can also lift heavy loads, yet there is a risk of the load falling if the power is [...]

  • STRONG MAGNETIC RODS FOR THE FOOD INDUSTRY

HOW TO CHOOSE STRONG MAGNETIC RODS FOR THE FOOD INDUSTRY?

HOW TO CHOOSE STRONG MAGNETIC RODS FOR THE FOOD INDUSTRY? Strong magnetic bar is a production equipment that guarantees the safety and quality of products. The ceramic industry and the food industry have been widely used and become one of the production equipments. The strong magnetic rod used in the pharmaceutical and food industries is [...]

  • Bonded NdFeB Magnets

Bonded NdFeB Magnets

Bonded NdFeB Magnets, Bonded Neo Magnets This isotropic resin bonded Neodymium-Iron-Boron material offers a high energy product (3-13 MGOe) between Ferrite and Sintered NdFeB. Application's include sensors and precision motors because it can be produced in complex shapes and magnetisation patterns.Capable of operating up to 120ºC, these magnets may be machined provided that adequate coolant [...]

  • recycle rare earth magnets

Canada’s Geomega to recycle rare earth magnets

Canada's Geomega to recycle rare earth magnets Canadian firm Geomega has raised funds to build a demonstration plant in Quebec for recycling rare earth elements from permanent magnets using a new processing technology that creates no acid waste. The project is nearing construction just as manufacturers seek ways to diversify the supply chain for permanent [...]

  • Sintered Magnet Market

Sintered Magnet Market Estimated to Experience a Hike in Growth by 2026

Sintered Magnet Market Estimated to Experience a Hike in Growth by 2026 Sintered magnets refer to permanent magnets manufactured through a metallurgical process called sintering which involves heating and compacting (finely pulverized) magnetic powder into the desired shape and size. Liquid phase sintering is the preferred process for manufacturing permanent sintered magnets. Post sintering, these [...]