Monthly Archives: December 2019

//December
  • Who Discovered Magnets and Other Rare Facts

Who Discovered Magnets and Other Rare Facts

Who Discovered Magnets and Other Rare Facts We all know that magnets attract iron particles. We have seen fridge magnets, other decorative articles, and even some toys that use magnets. We have heard of the applications of magnetism in daily life. But have we thought of who must have discovered magnets and when? Who [...]

By |December 30th, 2019|Iron Ore, Learning Resources, Magnesium, Magnet Applications, Magnetic Field, Magnetic Knowledge, Magnetic Science|Comments Off on Who Discovered Magnets and Other Rare Facts
  • Structure of water-jetting wall-climbing robot.

Permanent magnetic wheel system for water-jetting wall-climbing robot

Permanent magnetic wheel system for water-jetting wall-climbing robot Design of permanent magnetic wheel-type adhesion-locomotion system for water-jetting wall-climbing robot Regular surface-maintenances are necessary for high structures to increase service life. The traditional manual operation has shortcomings like limited maneuverability, poor operating quality, low operating efficiency, and high risk of physical harm, which makes it urgent [...]

By |December 28th, 2019|Magnet Applications, Magnetic Assemblies, Magnetic Field, Magnetic Industry, Magnetic Knowledge, Magnetic Principle, Magnetic Products, Magnetic Science, Neo Ring, Permanent Magnet|Comments Off on Permanent magnetic wheel system for water-jetting wall-climbing robot
  • Difference Between Paramagnetism and Diamagnetism

Difference Between Paramagnetism and Diamagnetism

Here's the Actual Difference Between Paramagnetism and Diamagnetism Paramagnetism and diamagnetism are two distinct types of magnetic properties exhibited by the different elements in nature. Here, we shall learn more about each of them, and find out how they differ from one another. Levitation! The Radboud University Nijmegen, the Netherlands, conducted experiments where water and [...]

By |December 26th, 2019|Learning Resources, Magnet Properties, Magnetic Field, Magnetic Knowledge, Magnetic Materials, Magnetic Principle, Magnetic Science, MPCO Magnetics News|Comments Off on Difference Between Paramagnetism and Diamagnetism
  • The Uses of Magnets

The Uses of Magnets

The Uses of Magnets Magnets, besides being fun to play with, have many uses. They are used in consumer as well as industrial goods. Let's get to know more about the uses of magnets. Magnets are materials which produce a magnetic field, and have the capability to attract ferrous components like iron, steel, cobalt, and [...]

  • Nanocomposite Permanent Magnet Materials

Nanocomposite Permanent Magnet Materials

Nanocomposite Permanent Magnet Materials Nanocomposite permanent magnet materials, combining magnetically hard and soft phases in nanoscale, is a new permanent magnetic material. Compared with traditional permanent magnetic material, nanocomposite lowers rare earth content and cost, exhibits high coercivity of hard magnetic phase and high saturation magnetization of soft magnetics phase, upgrades in temperature stability, heat [...]

  • CHARACTERISATION Magnetic Materials Measurements

Hard And Soft Magnetic Materials Measurements

Hard And Soft Magnetic Materials Measurements FULL CHARACTERISATIONS OF Hard And Soft Magnetic Materials Measurements - Full characterisation of a vast range of hard and soft magnetic materials, from room temperature to high temperature. In soft ferromagnetic material, we can observe all the magnetic properties even on finished samples, such as rotating machine stators or [...]

  • How to Remagnetize Magnets

How to Remagnetize Magnets

How to Remagnetize Magnets Steel or ceramic magnets that have been stored incorrectly, dropped repeatedly or are simply old may lose their magnetic properties. For optimal results when it comes to rejuvenating these magnets, touch one pole to the opposite pole of a neodymium magnet. Obtain the Materials Obtain a neodymium magnet, which is made [...]

  • Magnetizing System for Permanent Magnets

Magnetizing

Magnetizing or Magnetization In magnetizing the magnetic domains inside of a magnet are aligned with the magnetizing field. If the magnetizing field strength is high enough, all the domains will be aligned and the magnet is said to be magnetized to saturation. Magnetizing to saturation is usually recommended as only then are the magnetic properties [...]

  • Magnetic Measurements

Magnetic Measurements

Magnetic Measurements Magnetic Measurements For measuring of the fundamental magnetic properties of a material (Br, bHc, iHc, BHmax, demagnetisation curve), Hysteresisgraph or BH-tracker is used. A BH-tracker consists of an iron (usually FeCo) yoke to form a closed circuit, electromagnets to create the demagnetizing field and fluxmeters to determine the demagnetizing field and the materials [...]

  • Magnetic Losses of magnetic materials

Magnetic Losses

Magnetic Losses Reversible Magnetic losses are normal behavior for all magnetic materials. As the remanence of the all the magnetic materials decreases with increasing temperature, the temperature coefficient is negative, it is to be expected that the magnetic field of a magnet also will decrease with an increase of the temperature. However, this decrease of [...]

  • MPCO - Worldwide supplier of permanent magnets and magnetic assemblies

MPCO – Worldwide supplier of permanent magnets and magnetic assemblies

MPCO - Worldwide supplier of permanent magnets and magnetic assemblies MPCO Magnetic is a China company specialized in the design, production and marketing of permanent magnets. The head office is located in NINGBO city, Zhejiang. You are unique to us. And your needs too. Also, we do not produce only standard magnets, but we produce [...]

  • insert molding type plastic integrated magnets

About Plastic Integrated Magnet

About Plastic Integrated Magnet, Plastic coated magnets, ABS plastic covered magnets Magnets can be combined with different types of functional material to form specific magnetic assemblies such as pot magnet. For plastic integrated magnet, multiple components can be integrated through the injection molding process even each component has its own property. Magnet embedded in the [...]